IODA has installed in its head office in Via Pitagora, 25 -35030- RUBANO (PD) -ITALY a recharging station for electric cars batteries. The station’s power is 11 KW and the electric sockets are standard. We will be glad to offer the possibility for a recharge to our customers, better if by appointment.
One of the determining factors in the efficiency of a lighting system is the optics. The aim of the THR projectT is the possibility of having independent opics of the luminaire, which can be replaced in a very simple way, and therefore to change the type of lighting that is given to the environment without…
Read more
The purpose of the Auto Refractometer Calibration Set is to give you a good tool with which you can check the accuracy of the measurement, comparing the reading value with the true value of the model eye just measured. The calibration set for auto refractometers or keratometers is equipped with 8 model eyes…
Read more
The calibration set for auto refractometers / keratometers is equipped with 8 samples suitable to cover the whole range of powers of commonly used ophthalmic lenses. The interval in close steps is designed to ensure control of all measurable powers. The lenses are made with quality optical glass and with technologies used exclusively for the…
Read more
Release V_03 Update 04/22 R7L / R8L led lenses The convex surface is not shiny but has a micro processing to improve the projection of the light Suitable for single led diode Distance between lens and led: From 1 to 3mm Note: Plane convex lens shape, convex radius 7 and 8mm…
Read more
Using rapid prototyping process to create and test new lens geometries allows you to launch your product on the market before the competitors. How is this possible? With 3D printing it is easier and faster making changes to the lens design, considering also a significant reduction of the development costs involved . It is…
Read more
Small is beautiful! perhaps, but certainly the small size of the new cylindrical lens makes it usable in multiple applications. The material used is REVO-01, See link REVO-01 The basic dimensions are 20X20mm, edge thickness 3mm, radius of curvature 12.5mm Refractive index (nd) 1,507, dioptric power (Sph) +51, back focal length 18.5mm To see the…
Read more
Lenses in a projection system are often studied according to the specific requirements of the application, therefore angular distribution, efficiency, homogeneity of the projected light etc. At other times the lens is an integral part of the device design, therefore it must have a shape approved by the designer and in harmony with the whole…
Read more
The lighting projector lenses series “L”* (*smooth light), as well as the D series lenses, together with the special material REVO-01, are used in systems with light sources such as Led C.O.B.(acronym of “Chip on board” or multiple Led) or power Led. In this particular series of lenses the convex surface is “rough”, i.e. is not…
Read more
When you think of a lens, you generally imagine a solid with two curved surfaces (concave and / or convex) both shiny, i.e. completely transparent. In some lighting applications, a surface of the lens that is “rough”, saying it is not shiny, can be a simple solution to make the projected light more homogeneous and…
Read more
Italiano