Semi finished Wave3 and Wave5 – Solution for high power lenses – Semi finished, omega type, available also in index 1.498 and 1.6; thanks to a short convex radius it is possible to produce high positive dioptres power. There are two different profiles: Wave3 semi finished has a slope between the center and the edge,…
Read more
Gemini – Titanium Photocromatic semi finished plate – Titanium semi finished are available with index 1.7 and 1.8. Titanium semi finished are realized with a grey or brown photocromatic plate glued to the convex surface. The thickness of the photocromatic plate is 1.50 mm and the special glue used guarantees a perfect joining between both…
Read more
Aries Hyperaspheric Semi finished lenses – High myopia solution – The Hyperaspheric semi finished lenses are an excellent solution for the people afflicted by medium and high myopia. The main characteristic of this type of lens is the concave surface worked with the aim to reduce remarkably the thickness of the lens border and therefore…
Read more
Following the customer’s request, IODA has created a parabolic mirror to focus LED light – this project called “LUX” is an excellent example of the potential work by IODA. The main aim of this project is to direct the LED light with the highest efficiency. This project develops in three steps: First – Calculation of…
Read more
The Led module series are designed for AC drive (or operation) doesn’t need the converter which is essential for conventional general lighting. Also, its high power factor can show best energy saving effect in many lighting applications. As there is no need of converter, led module series realize as close life-time as original LED and…
Read more
Cylindrical lenses are used in the generation of linear lighting (if positioned after a collimator or after a collimated laser beam), this particular lighting, line of light, is used in the lighting world to obtain particular scenic effects, or to define spaces if projected. on the floor or walls. Even in applications where linear cameras…
Read more
We have often received requests for a diffusing lens that increases the native angular projection of a COB to resemble an incandescent bulb, in which the light is radiated almost 360 degrees, and we at IODA could not ignore that request! Using a normal COB Led, without any secondary optics, the light distribution angle is…
Read more
The main feature of Fresnel lenses is the excellent power of light collection. This skill allows the use of these lenses in a great range of applications, particularly in lighting applications, when the choice of emitter is LED C.O.B. of great power. The Fresnel lens allows the construction of large lenses, but with a small…
Read more
The lighting projector lenses “D”* series, (*drive the light) were developed by us at IODA SRL in collaboration with the National Institute of Astro Physics of Padua (INAF). The accurate aspherical profile of the convex of the lens, together with the use of the polyurethane material REVO-01, enable the lenses “D” series to give maximum…
Read more
We at IODA SRL developed the N-series collimator Led lenses for Cree XT-E Leds and similar ones (diode dimension untill 1,8 mm). With the cooperation of the University of Padua, we of IODA SRL developed a new type of “collimator secondary led light lenses”. These lenses for lighting LED are not reflecting parabolas, but crossed…
Read more
Italiano